The Best Way to Install a Wall Water Feature

Make any living space better with a wall fountain. A waterfall will bring a sensation of peacefulness with the comforting sounds of trickling water. Entryways are common places for wall fountains, but they can also be displayed in any common area. The best way to mount one depends on the design, but the standard process is the same. a_544__26466.jpg Assembly will include putting together a number of parts. The foundation and the upper part will need to be put together as well as the pump and the tubing. Be sure to review the directions before starting to make sure it is done correctly. You should find the process relatively straightforward. That said, there can be small differences depending on which design you have. Have a friend hold the wall fountain in the desired location, then mark the wall accordingly. To ensure a straight line, use a level. Mark the wall where you want the upper end of the wall fountain as well as the base. There is more than one way to hang a wall fountain. There are slots on the back which can be hung onto the screws you place on the wall. The other way is to hang it on brackets you have secured to the wall. The bracket alternative is best, especially for wall fountains that are big and heavy. Determine where the brackets will go and then mark the precise spot on the wall. Use a drill to make the pilot holes on the wall for the drywall anchors. Insert the anchors in the wall with a hammer. Hold the brackets in place on the wall and use a wireless drill or screwdriver to affix them.

At this point, lift your unit and hang it on the mounting brackets. Ensure that it is properly installed and straight. When you are confident the unit is secure, add water. The pump should be completely immersed under water. Then plug it in and the water will start to flow. Very carefully put in just enough water to reach one inch below the top edge of the basin. Be mindful not to fill it totally to the top or it will overflow when you switch off the pump. The water level will rise because all of the circulating water will settle down at the base of the basin. The water will overflow and cause damage if the wall fountain is overly full.

Installing a Fountain In Smaller Backyards

You can make your space look bigger due to the reflective effect of water. Dark materials alter the refractive properties of a fountain or water feature. If your purpose is to highlight your new feature at night, underwater lights in varied colors and shapes will do the trick. Benefit from the sun’s rays by using eco-lights during the day and underwater lighting fixtures during the night. The calming effect produced by these is oftentimes used in nature techniques to alleviate anxiety and stress.

The vegetation in your yard is a great spot to fit in your water feature. Your pond, man-made river, or fountain is the perfect feature to draw people’s interest. The versatility of water features is that they can be set up in large backyards as well as in small verandas. The ambience can be significantly changed by placing it in the best place and using the right accessories.

Explore the World’s Tallest Fountains

Located in Jeddah, Saudi Arabia, the King Fahd Fountain (1985) is the highest continually-functioning fountain worldwide. It propels water reaching 260 meters (853 feet) above the Red Sea.

The Han-Gang River in Seoul, Korea (2002), comes in 2nd with water levels of 202 meters (663 feet).

Next to the Mississippi River in St. Louis, Missouri, is the Gateway Geyser (1995) which reaches third place. With water reaching 192 meters (630 feet) in the air, this fountain is the tallest in the United States.

Next is the fountain found in Karachi, Pakistan (Port Fountain) which jets water up to 190 meters (620 feet) in height.

Number 4: Fountain Park (1970), Fountain Hills, Arizona - although it can reach heights of 171 meters (561 feet) when all three pumps are in use, it only reaches 91 meters (300 feet) on a normal day.

The Dubai Fountain which made its debut in 2009 is located next to tallest building worldwide, the famous Burj Khalifa. Once every 1/2 hour, this fountain begins dancing to pre-recorded musical themes while shooting water 73 meters (240 feet) high. It also has extreme shooters, rarely used, which go as high as 150 meters (490 feet).

Number 7 is the Captain James Cook Memorial Jet in Canberra, completed in 1970, launching water 147 meters (482 feet) high.

And at number 8, we have the the Jet d'eau, in Geneva (1951), measuring 140 meters (460 feet).

The Many Styles of Water Wall Fountains

Wall fountains are well suited to small patios or gardens because they do not take up too much space while also adding a bit of style and providing a great place to find peace and quiet. Whatever design of outdoor wall fountain you are searching for whether it be traditional, contemporary, classic, or Asian you will certainly find the one you like best. Your tastes determine the type you buy so while there may not be a prefabricated fountain to satisfy you, you do have the option of having a custom made one.

The two types of water features available to you include mounted and freestanding models. Mounted wall fountains are little and self-contained versions which can be displayed on a wall. Typically made of resin (to resemble stone) or fiber glass, these kinds of fountains are lightweight and easy to hang. Sizable free-standing wall fountains, often referred to as floor fountains, have their basins located on the floor and a flat side leaning on a wall. Typically made of cast stone, these water features have no weight constraints.

It is a good idea to incorporate a custom-made fountain into a new or existing wall, something often recommended by landscape experts. Employing an expert mason is your best option to build the basin and install the required plumbing. You will need to incorporate a spout or fountain mask into the wall. A custom-made wall fountain blends into the landscape instead of standing out because it was a later addition, which contributes to a unified appearance.

The Many Reasons to Add a Wall Fountain

You can improve your exterior area by including a wall fountain or an outdoor garden water feature to your yard or gardening project. Historical fountains and water features have stirred the notice of modern-day designers as well as fountain manufacturers. Therefore, in order to connect your home to earlier times, add one these in your decor. Among the many attributes of these beautiful garden fountains is the water and moisture they release into the air which attracts birds and other wild life as well as helps to balance the ecosystem. For instance, pesky flying insects are usually discouraged by the birds drawn to the fountain or birdbath.

The area necessary for a cascading or spouting fountain is considerable, so a wall fountain is the ideal size for a small yard. You can choose to install a stand-alone fountain with a flat back and an connected basin propped against a fence or wall in your backyard, or a wall-mounted type which is self-contained and suspended from a wall. Be sure to include a fountain mask to an existing wall and a basin to collect the water at the base if you want to put in a fountain to your living area. The plumbing and masonry work necessary for this type of job requires expertise, so it is best to employ a skilled person rather than go at it yourself.

Public Fountains Found in Historical Documents

Towns and communities depended on working water fountains to funnel water for cooking, bathing, and cleaning from nearby sources like lakes, channels, or springs. To generate water flow through a fountain until the later part of the 1800’s, and generate a jet of water, mandated the force of gravity and a water source such as a spring or reservoir, located higher than the fountain. The appeal and spectacle of fountains make them appropriate for historical memorials. Rough in design, the first water fountains didn't appear much like present fountains. Designed for drinking water and ceremonial functions, the very first fountains were simple carved stone basins. Natural stone basins as fountains have been discovered from 2000 BC. The first fountains put to use in ancient civilizations depended on gravity to regulate the circulation of water through the fountain. The placement of the fountains was influenced by the water source, which is why you’ll usually find them along reservoirs, canals, or streams. Fountains with decorative Gods, mythological beasts, and creatures began to appear in Rome in about 6 B.C., crafted from rock and bronze. Water for the open fountains of Rome was brought to the city via a complex system of water aqueducts.

Historic Crete & The Minoans: Garden Fountains

Fountains and Water and the Minoan Civilization These delivered water and eliminated it, including water from waste and deluges. The primary materials utilized were rock or terracotta. Whenever clay was employed, it was frequently for channels as well as water pipes which came in rectangular or spherical patterns. The cone-like and U-shaped terracotta pipelines that were found have not been seen in any other society. The water supply at Knossos Palace was handled with a strategy of terracotta pipes which was put beneath the floor, at depths going from a couple of centimeters to many meters. The clay pipes were furthermore utilized for amassing and holding water. Hence, these pipes had to be ready to: Underground Water Transportation: This undetectable setup for water circulation may have been made use of to give water to specific individuals or activities. Quality Water Transportation: The water pipes may also have been utilized to carry water to water fountains which were separate from the city’s normal system.


The Circulation of Water Fountain Engineering Knowledge in Europe
Dissiminating practical hydraulic knowledge and water fountain design ideas throughout Europe was accomplished with the written documents and illustrated publications of the time. An un-named French... read more
The Distribution of Water Fountain Manufacturing Knowledge in Europe
Throughout the European countries, the principal means of spreading practical hydraulic facts and fountain design ideas were the published pamphlets and illustrated publications of the day,... read more
The Original Fountain Artists
Often working as architects, sculptors, artists, engineers and highly educated scholars all in one, from the 16th to the later part of the 18th century, fountain designers... read more
Agrippa’s Magnificent Water-lifting Machine
The compliments Agrippa’s water-lifting invention earned by Andrea Bacci in 1588 was short-lived. Merely years afterward, in 1592, the earliest contemporary Roman aqueduct, the Acqua Felice, was hooked up to the Medici’s... read more
Ancient Crete & The Minoans: Outdoor Fountains
During archaeological excavations on the island of Crete, many kinds of conduits have been discovered. These delivered water and eliminated it,... read more