The Right Method to Mount a Wall Water Feature

Make any room better with a wall fountain. 6823-7102__06022.jpg Harmony and tranquility will fill the room due to the soothing sound of the waterfall. Foyers are common places for wall fountains, but they can also be hung in any common space. How to mount one varies somewhat depending on the model, but there are some general directions that apply to all of them. Be sure that all the different parts are used in constructing it. It will be necessary to connect the pump and tubing, and the base will need to be attached to the top portion. Do not forget to review the instructions before getting started in order to avert mistakes. You will find the procedure relatively easy. Note, however, that the directions for your particular model can vary a bit. Have a friend hold the wall fountain in the desired place, then mark the wall as necessary. To ensure a straight line, use a level. It is recommended to mark both the bottom and the top positions. There is more than a single method to install a wall fountain. There are holes on the back which can be mounted onto the screws you put on the wall. Alternatively, you could install brackets to the wall and use those.

This option tends to be suggested for big wall fountains. Determine where the brackets will go and then mark the precise location on the wall. Utilize a drill to make the pilot holes on the wall for the drywall anchors. Insert the anchors in the wall using a hammer. Use a cordless drill or a screwdriver to install the brackets, making certain they are level. Mount your wall fountain by hanging it onto the brackets. Be certain that it is properly aligned and not loose. Water can be added once the fountain has been secured. There should be adequate water to cover the water pump. At this point plug it in and the water will start to flow. The water should fill the basin to within one inch of the upper end. Be mindful not to fill it totally to the top or it will overflow when you switch off the pump. Once the pump is shut off the water all settles at the bottom of the bowl, causing the water level to rise. When the fountain is overly full, water can spill out and cause damage to the immediate area.

What is the Ideal Material for your Wall Water Feature?

Wall mounted fountains are available is many kinds of materials. Fiberglass is an excellent choice since this material is strong, light and waterproof. Transport and delivery of these kinds of fountains are easy because they do not take up a great deal of room on the delivery truck.

There are many materials that can be used in crafting them, such as stone, clay, wood, and metals such as copper, although most indoor ones are made of some type of metal. Copper remains the perfect choice for your fountain, in spite of the fact that it has become an increasingly expensive raw material.

Typical Mediterranean fountains found in Italy, Spain, and France can usually be imitated by using cast stone. These very sturdy molded features made of cast stone concrete are ideal if you need to place the fountain on the ground against a wall. Available in a number of hues, they are generally made in the USA due to the high price of transportation.

The Elegance of Simple Garden Decor: The Large Outdoor Fountain

Having a pond in the vicinity of your outdoor water fountain is no longer required because they can now be situated on a wall close by. Due to the various options available, it no longer necessary to contend with excavations, complcated installations or cleaning the pond. Plumbing is no longer needed since this feature in now self-contained. Frequently adding water is the only requirement. Drain the water from the basin and add clean water whenever the surrounding area is not clean.

Outdoor wall fountains come in lots of different materials, but they are normally made of stone and metal. Knowing the style you want shows the right material to use. The best designs for your outdoor wall fountain are those which are hand-crafted, easy to put up and not too heavy to hang. Having a fountain which needs little maintenance is important as well. The re-circulating pump and hanging hardware are usually the only parts which need additional care in most installations, although there may be some cases in which the setup is a bit more intricate. It is very easy to liven up your yard with these types of fountains.

The Interesting Origin of the Wall Fountain

When he was looking to make Rome the capital of the Christian community, Pope Nicholas V took advantage of the opportunity to request translations of Ancient Greek texts, converting them to Latin. This brought Rome (and himself) acclaim in the Christian world. To further boost his city's prestige, an old aqueduct was reconstructed to improve the supply of fresh drinking water to the city from 8 miles away. (This aqueduct is named the Acqua Vergine) He began renovating it in 1453. At the same time, he revived the practice of installing lavish fountains, called mostras, to mark the terminal point of an aqueduct. Architect Leon Alberti was ordered to develop a wall fountain, a undertaking which grew in size and scope until it turned into the distinguished Trevi Fountain of Rome. Thus, the first known wall fountain arose from the Pope's ambition to make the City of Rome Christianity's capital and restore the city's fresh water supply.

Discover Peace with Outdoor Fountains

Your mood is positively influenced by having water in your yard. The trickling sounds coming from your fountain will be helpful in masking any loud sounds in your neighborhood. This is a place where you can relax and enjoy nature. Bodies of water such as seas, oceans and rivers are commonly used in water therapies, as they are considered therapeutic. Create the ideal oasis for your body and mind and get a fountain or pond today!

The Dissemination of Outdoor Fountain Design Knowledge

Contributing to the advancement of scientific technology were the published papers and illustrated books of the time. They were also the principal means of transferring useful hydraulic ideas and water fountain design ideas all through Europe. An un-named French water feature developer was an internationally celebrated hydraulic innovator in the late 1500's. His expertise in developing landscapes and grottoes with integrated and brilliant water attributes began in Italy and with mandates in Brussels, London and Germany. In France, towards the closure of his lifetime, he published “The Principle of Moving Forces”, a publication which became the primary text on hydraulic technology and engineering. Classical antiquity hydraulic breakthroughs were elaborated as well as revisions to key classical antiquity hydraulic breakthroughs in the publication. Dominant among these works were those of Archimedes, the developer of the water screw, a mechanized way of transferring water. Sunlight heating liquid in a pair of vessels unseen in a room adjacent to an ornamental water fountain was shown in one illustration. The heated liquid expands and then rises and closes the water lines thereby activating the water feature. Pumps, water wheels, water attributes and garden pond designs are mentioned in the publication.

Pick from Many Exterior Wall Fountain Designs

Small verandas or courtyards are a perfect place to install wall fountains because they add style to an area with little space. When looking at the many types of outdoor wall fountains available including traditional, antique, contemporary, or Asian, you are certain to find one most suitable to your design ideas. Your tastes dictate the type you buy so while there may not be a prefabricated fountain to suit you, you do have the option of having a custom made one.

Mounted and stand-alone water features are available on the market. Small, self-contained models can be hung on a wall are called mounted wall fountains. Normally made of resin (to resemble stone) or fiber glass, these types of fountains are lightweight and easy to hang. In large stand-alone fountains, otherwise known as wall fountains, the basin is located on the ground with the flat side positioned against a wall. Water features such as these are ordinarily made of cast stone and have no weight limits.

Landscape professionals often recommend a customized fountain for a brand new or existing wall. A skilled mason is required to install the water basin against the wall and properly install all the plumbing inside or behind the wall. You will need to integrate a spout or fountain mask into the wall. The cohesive look provided by customized wall fountains make them appear to be part of the landscape rather than an afterthought.


The Circulation of Water Fountain Manufacturing Knowledge in Europe
Contributing to the development of scientific technology were the published papers and illustrated publications of the time. They were also the principal method of transferring useful hydraulic ideas and fountain design ideas throughout Europe. ... read more
Fountain Engineers Through History
Often working as architects, sculptors, artists, engineers and cultivated scholars, all in one, fountain designers were multi-faceted people from the 16th to the later part of the 18th century. Leonardo da Vinci, a Renaissance artist,... read more
Acqua Vergine: The Remedy to Rome's Water Problems
With the construction of the first elevated aqueduct in Rome, the Aqua Anio Vetus in 273 BC, people who lived on the city’s hillsides no longer had to rely only on naturally-occurring spring water for their requirements. Throughout this period, there... read more
Fountains And Their Use In Crete & Minoa
On the Greek island of Crete, digs have unearthed channels of several sorts. These were made use of to supply urban centers with water as well as to lessen flooding and get rid of... read more
Ancient Greece: Architectural Sculpture
Historically|Traditionally|In the past}, the vast majority of sculptors were paid by the temples to embellish the elaborate pillars and archways with renderings of... read more