The Innumerable Possibilities in Wall Fountains

ft_280__12916.jpg Placing a wall fountain in your yard or patio is perfect when you want to relax. You can have one custom-built to fit your requirements even if you have a minimum amount of space. Both the stand alone and mounted types need to have a spout, a water basin, internal tubing, and a pump. There are any number of models to choose from most notably conventional, contemporary, classic, or Asian.

Also referred to as a floor fountain, a stand-alone wall fountain is normally rather big, and its basin is located on the ground.

It is possible to integrate a wall-mounted water feature onto an already existent wall or built into a new wall. The appearance of your landscape will seem more cohesive instead of disjointed when you put in this kind of fountain.

Do Pets Enjoy Water Fountains?

Give some thought to how your pet may react to a water feature before you buy one. Your freestanding fountain may be taken for a big pool or a drinking pond by your pooch. Your pets will not be negatively affected if you incorporate a wall water element to your property. You may need to consider where you will locate the fountain as birds may take it as a bathing pond. Putting a birdbath in your yard is the ideal answer if you want to attract birds. To prevent this, however, installing a wall water fountain inside your home is a great alternative. Dentists’ and doctors’ practices as well as manor homes are just a few of the places where you can find these types of fountains.

The Beginnings of Modern Outdoor Wall Fountains

Pope Nicholas V, himself a learned man, ruled the Roman Catholic Church from 1397 to 1455 during which time he commissioned many translations of old classical Greek texts into Latin. In order to make Rome worthy of being the capital of the Christian world, the Pope decided to embellish the beauty of the city. Restoration of the Acqua Vergine, a ruined Roman aqueduct which had carried clean drinking water into the city from eight miles away, began in 1453 at the behest of the Pope. The ancient Roman tradition of marking the arrival point of an aqueduct with an magnificent celebratory fountain, also known as a mostra, was restored by Nicholas V. At the behest of the Pope, architect Leon Battista Alberti began the construction of a wall fountain in the place where we now find the Trevi Fountain.

The water which eventually supplied the Trevi Fountain as well as the renown baroque fountains in the Piazza del Popolo and Piazza Navona came from the modified aqueduct which he had renovated.

The Nature of Splash Fountains

People view splash fountains, or bathing fountains, as a great way to freshen up on days when it is very hot outside. For this reason, they are also called interactive fountains. These fountains are specially created to allow for easy access - and include nonslip surfaces, have no standing water to prevent possible drowning, thus eliminating the need for lifeguards or supervision. These splash pads - known as "spraygrounds" - are many times located in public pools, public parks, or public playgrounds. Dundas Square set in Toronto, Canada, features a splash fountain warmed by solar energy which is then absorbed by the unique dark-colored granite slabs. This impressive fountain boasts 30 groups of 3 rows of 10 spigots for a total of 600 ground nozzles. Bundles of 30 nozzles are found directly beneath a stainless-steel grille. In the main walkway through Dundas Square you will see the 20 grilles made up of 2 rows of 10.

Musical Fountains and Their Amazing Sounds

Musical fountains, often referred to as dancing fountains, are animated, visually pleasing fountains used for recreational purposes. Using timed sound waves and illumination, as well as lasers, against water particles produces this image. When the water refracts and reflects the light, it creates incredible three-dimensional images.

Such huge installations, use hundreds of water jets and lights, and can cost into the millions of US dollars. Musical features can be quite complicated and require a certain degree of mechanical, hydraulic, electrical, and electronic pieces that just might be more impressive to the audience than the actual show!

The jaw-dropping musical fountain in Dubai is without a doubt the largest such project in the world. Designed by California based WET Design, which also fashioned the famous Las Vegas fountain at the Bellagio Hotel, it spans the 30-acre man-made Burj Khalifa Lake. Six thousand-six hundred lights, twenty-five colored projectors as well as fog and fire are needed to put on the display. With a assortment of music from classical, to contemporary Arabic and world music, it spans 207-meters and projects water up to 150 meters (490 feet) - equal to a 50-story building) - into the air. The end cost was estimated at 218 million dollars. The fountain along with the Dubai Mall were both officially opened on May 8, 2009 by Sheikh Mohammed bin Rashid Al Maktoum. Set in front of the Burj Khalifa, this fountain is best seen from the Souk Al Bahar or the Dubai Mall.

Outdoor Fountains And Their Use In Ancient Minoa

On the Greek island of Crete, excavations have discovered conduits of multiple varieties. These provided water and removed it, including water from waste and storms. Most were created from terracotta or stone. Anytime terracotta was used, it was normally for waterways as well as water pipes which came in rectangle-shaped or round shapes. The cone-like and U-shaped terracotta conduits which were discovered haven’t been detected in any other civilization. The water availability at Knossos Palace was handled with a strategy of terracotta pipes which was placed underneath the floor, at depths ranging from a few centimeters to several meters. The clay water lines were furthermore utilized for amassing and holding water. Thus, these conduits had to be effective to: Subterranean Water Transportation: It’s not really known why the Minoans needed to move water without it being noticed. Quality Water Transportation: The conduits may also have been made use of to move water to fountains that were separate from the city’s regular process.

Rome, Gian Lorenzo Bernini, And Water Features

There are any number of famous Roman water features in its city center. One of the best ever sculptors and artists of the 17th century, virtually all of them were planned, conceptualized and built by Gian Lorenzo Bernini. His skills as a water feature designer and also as a city architect, are visible throughout the streets of Rome. Bernini's father, a celebrated Florentine sculptor, guided his young son, and they finally transferred in Rome, to fully express their artwork in the form of public water features and water features. The young Bernini received praise from Popes and influential artists alike, and was an excellent worker. At first he was well known for his sculpting skills. An authority in classic Greek engineering, he utilized this knowledge as a base and melded it flawlessly with Roman marble, most notably in the Vatican. He was affected by many great artists, however, Michelangelo had the biggest impact on his work.


Chatsworth Gardens: The Revelation Water Feature
“Revelation,” the latest addition to the ornamental outdoor fountains of Chatsworth, was designed by renowned British sculptor Angela Conner. In celebration of the Queen’s 80th birthday,... read more
The Newest Addition to the Gardens of Chatsworth: "Revelation"
“Revelation,” the latest addition to the beautiful outdoor fountains of Chatsworth, was created by well-known British sculptor Angela Conner. She was mandated by the now deceased 11th Duke of Devonshire to create a limited edition bust of Queen Elizabeth, in... read more
The Dispersion of Water Fountain Design Technology
Dissiminating useful hydraulic knowledge and water fountain design ideas all through Europe was accomplished with the written papers and illustrated books of the time. An unnamed French fountain... read more
How Mechanical Concepts of Fountains Spread
The published reports and illustrated pamphlets of the time contributed to the advancements of scientific technology, and were the primary means of dissiminating practical hydraulic information and water feature suggestions all through... read more
The Original Water Feature Manufacturers
Multi-talented people, fountain artists from the 16th to the late 18th century often functioned as architects, sculptors, artists, engineers and highly educated scholars all in one.... read more
Agrippa's Eye-popping, but Mostly Forgotten Water-Lifting Mechanism
Although the machine designed by Agrippa for carrying water earned the respect of Andrea Bacci in 1588, it seemed to vanish not very long after. It might have come to be dated when the Villa Medici was enabled to obtain water from the Acqua Felice,... read more