The Right Method to Install a Wall Water Fountain

Enhance nearly any space with the addition of a wall fountain. The effects of the water sounds include providing serenity and calm to the room. 3306_ag_art__42235.jpg While any room will benefit from a wall fountain, they are most often put in entryways. The best way to hang one depends on the model, but the standard procedure is the same. Be sure that all the different parts are used in constructing it. You will need to connect the pump and tubing, and the base will need to be attached to the top portion. Remember to review the instructions before getting started in order to avert mistakes. Generally, it is simple and straightforward. Be aware, though, that the model you have might require a somewhat different procedure. Do not hesitate to get someone to assist you to hold the wall fountain in the right place while you make a tiny mark on the wall. To ensure it will be straight, use a level. It is recommended to mark both the bottom and the top positions. There is more than a single technique to install a wall fountain. You will find holes on the back side of the wall fountain which can be mounted directly onto the screws. A second option is go with brackets mounted on the wall. This last one is the more advisable way, specifically if your fountain is large. Mark the spot on the wall where the brackets need to be attached. Drill pilot holes in the wall wherever you need to place the drywall anchors.

Carefully tap on the anchors with a hammer to insert them into the wall. Attach the brackets by making sure they are straight and then screwing them into the wall with a drill or screwdriver. Then, hoist your unit and fit it on the mounting brackets. Ensure that it is firmly mounted and straight. Put in water once the wall fountain is ready. Use sufficient water so that the pump is entirely covered. It is now time to plug it in and observe the water circulate. Carefully put in just enough water to reach one inch below the top edge of the basin. Never fill the basin all the way to the top or it will overflow whenever the pump is not on. The water level will rise because all of the flowing water will settle down at the bottom part of the bowl. If there is too much water, it will spill out and can damage your floor and furniture.

Michelangelo’s Roman Water Fountains

Two Florentine artists by the names of Michelangelo and Ammannati designed the earliest Roman wall fountains during the 16th century. The fountain in the Piazza del Campidoglio in Rome, which was completed in 1536 and became part of the façade of the Palazzo Senatorio, was Michelangelo’s first creation. The construction of a conduit from the Aqua Felice to the Capitol, which allowed for a more spectacular water display, was included years later.

Anticipating this, Michelangelo had added a more sizable basin styled on the late Cinquecento.

The question remains as to whether the famous maestro was the earliest to design wall fountains. The maestro's designs absolutely shaped the future style of fountains in Italy. The Fountain of the River Gods at the Villa Lante, Bagnaia 1, and the Fountain of the Mugnone set between flights of stairs on the main axis of the Villa Pratolino are further illustrations of this type of structure.

It seemed to be Michelangelo’s destiny to combine classic Roman characteristics into his fountains instead of using his own considerable talents to design original pieces. An original wall fountain for the top of the corridor of the Belvedere in the Vatican was commissioned to the reknowned artist by Julius III (1550-1555). The fountain was to be adorned with a marble figure of Moses hitting a stone from which water flowed. Rather than making the Moses sculpture, which would take too much time to complete, an antique figure of Cleopatra was used in its place, however. A design by the well-known artist was thought to be too time-consuming, therefore, an ancient depiction placed above the fountain seemed to be a better alternative.

Multi -Level Water Elements

Fountains with multiple levels can be found just about anywhere and have been displayed in gardens for many years. You can see a lot of these fountains in Italy, Spain, and other Southern European countries. Public squares and building courtyards are very popular areas where you will find tiered fountains. While some multi-level fountains have sophisticated designs including sculptures or artwork, others are very basic.

While they can be located just about anywhere, they seem particularly at home in more classic settings. The fountain should blend right into the surroundings as if it has been there since the beginning.

Wall Mounted Water Features: A Distinctive Touch to your House

Your house or garden are fantastic places for a wall mounted fountain. Is the area you have available too small for a water element? Overcome this problem with a wall fountain. There are various spots where you can set one up such as on a wall, a fence, or a post. When you have decided on the exact place to put your water feature, fill it with water and connect the fountain’s pump electrical cord. Your indoor or outside space now has a functioning water fountain. Take into account the location or wall where you will be setting up your wall fountain. Envision the best setting to set up it. Think about how your fountain will look in different lights, such as in daylight, evening light and any other light you will be using, because this will influence what your fountain looks like.

Gian Lorenzo Bernini's Fountains

There are countless famous Roman water features in its city center. Gian Lorenzo Bernini, one of the most brilliant sculptors and artists of the 17th century planned, conceptualized and constructed almost all of them. Traces of his life's efforts are obvious throughout the roads of Rome simply because, in addition to his skills as a fountain builder, he was additionally a city architect. Bernini's father, a renowned Florentine sculptor, mentored his young son, and they ultimately moved to Rome, in order to fully express their art, primarily in the form of public water fountains and water features. The young Bernini earned praise from Popes and influential artists alike, and was an excellent employee. He was originally renowned for his sculpture. Working seamlessly with Roman marble, he used a base of knowledge in the classic Greek architecture, most notably in the Vatican. Although many artists had an impact on his work, Michelangelo had the most profound effect.

Musical Fountains and Their Beautiful Sounds

An animated musical fountain, also referred to as a dancing fountain which additionally creates three-dimensional images, is generally used for leisure purposes. Timed light, including lasers, and sound waves which hit water molecules, generates stunning displays. The water must be refracted and reflected to generate the spectacular three-dimensional images.

Running into the millions of dollars, such large installations call for hundreds of water jets and lights. Musical features can be quite complex and require a certain degree of mechanical, hydraulic, electrical, and electronic pieces that just may be more amazing to the audience than the actual show!

The Dubai Fountain is currently the largest musical project in the world. Famous for the creation of the water fountain at the Bellagio Hotel in Las Vegas, WET Design of California designed it on the 30-acre man-made Burj Khalifa Lake. This fantastic feature uses of 6,600 lights, 25 colored projectors, as well as fire an fog. It measures 275 m (902 ft) in length and jets water 150 m (490 ft) into the sky - which is comparable to a 50-story building - and is accompanied by various styles of music from classical to contemporary Arabic to world music. The final price here was approximately 218 million US dollars. The Dubai Mall and the water fountain were formally opened on May 8, 2009 by Sheikh Mohammed bin Rashid Al Maktoum. The finest glimpse of the fountain, located in front of the Burj Khalifa, is from the Souk Al Bahar or the Dubai Mall.

The Subtle Appeal of the Wall Fountain

A wall fountain can be an important design element in your residence or office, enough so that it makes a good impression on your family and friends alike. Having a wall water feature in your daily life not only stimulates the eyes with its loveliness but also your ears with the soothing background sounds it produces. Think of the positive impact it will have on visitors when they experience its wondrous sights and sounds.

Wall elements are a good choice if the space you occupy is more modern in appearance. Also made in modern-day materials such as stainless steel or glass, they can add pizzazz to your interior style. Is your house or business space in short supply? A wall water fountain is perhaps the best solution for you. You can save your limited space by installing one on a wall. You may note that many busy office lobbies have fountains. Inside spaces are not the only places to display a wall fountain, however. Outdoor wall water features can be manufactured of fiberglass or resin. Spruce up your veranda, courtyard, or other outdoor areas with a water fountain made of these water-resistant materials.

Wall fountains can be manufactured in a variety of different looks ranging from contemporary to classic and provincial. The type you pick for your space is dictated by individual design preferences. A city dweller’s design ideas might call for polished glass whereas a mountaineer might prefer a more traditional material such as slate for a mountain lodge. You can choose the material most suitable to your needs. No doubt however, fountains are sure to add to your quality of life and impress your guests.


Gardens of Chatworth: The "Revelation" Fountain
“Revelation,” the latest acquisition to the decorative outdoor fountains of Chatsworth, was designed by well-known British sculptor Angela Conner. The... read more
The Father Of Roman Water Fountain Design
There are lots of renowned Roman water features in its city center. Almost all of them were planned, designed and built by one of the greatest sculptors and artists of the 17th century, Gian Lorenzo Bernini. He was also a urban designer, in... read more
Gian Bernini's Garden Fountains
In Rome’s city center, there are countless celebrated water features. One of the best ever sculptors and designers of the 17th century, Gian Lorenzo Bernini planned, created and built nearly all of them.... read more
Agrippa's Amazing, but Mostly Forgotten Water-Lifting Device
Although the mechanism developed by Agrippa for moving water earned the respect of Andrea Bacci in 1588, it seemed to fade not very long after. Only years afterward, in 1592, the earliest contemporary... read more