The One Cleaning Solution to NEVER Use On Your Garden Water fountains

In order to ensure that water fountains last a long time, it is important to practice regular maintenance. 115439-10705__27592.jpg It is essential to clean it out and take out any debris or foreign objects that might have gotten into or onto it. Additionally, anywhere light from the sun mixes with still water, algae can form. Either sea salt, hydrogen peroxide, or vinegar can be mixed into the water to avoid this problem. There are those who like to use bleach, but that is harmful to any animals that might drink or bathe in the water - so should therefore be avoided.

An extensive cleaning every three-four months is recommended for garden fountains. First you must remove the water. When you have done this, wash inside the water reservoir with a gentle detergent. Feel free to use a toothbrush if necessary for any stubborn crevasses. Make sure all the soap is totally rinsed off.

It is highly suggested taking the pump apart to better clean the inside and remove any plankton or calcium. You might want to let it soak in vinegar for a few hours to make it quicker to scrub. If you want to minimize build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any components that will stick to the inside of the pump.

One final tip for keeping your fountain in top working shape is to check the water level every day and make sure it is full. Low water levels can ruin the pump - and you don't want that!

The Many Reasons to Add a Water Feature

The addition of a wall fountain or an outdoor garden fountain is a great way to beautify your yard or garden design. Any number of present-day designers and fountain artisans have found ideas in the fountains and water features of the past. As such, introducing one of these to your interior is a great way to connect it to the past. The water and moisture garden fountains release into the atmosphere draws birds and other creatures, and also balances the ecosystem, all of which add to the advantages of having one of these beautiful water features. For instance, irritating flying insects are usually deterred by the birds drawn to the fountain or birdbath.

The area required for a cascading or spouting fountain is substantial, so a wall fountain is the perfect size for a small yard. Two options to choose from include either a freestanding type with an even back set against a fence or wall in your garden, or a wall-mounted, self-contained type which hangs on a wall. A water feature can be added to an existing wall if you include some kind of fountain mask as well as a basin to collect the water at the bottom. The plumbing and masonry work necessary for this type of job requires training, so it is best to employ a skilled person rather than do it yourself.

The Numerous Material Choices for your Wall Water Fountain

Selecting the ideal material for your wall mounted fountain is completely up to you. When you are looking for a strong, light, waterproof material, fiberglass is your ideal alternative. Furthermore, this type of fountain can be easily shipped and does not require the use of a big truck to deliver it.

They are available in many different materials such as stone, clay, wood, and different types of metal, including copper. The best material for your fountain remains copper, although it has become quite pricey due to recent price increases. Cast stone is the best material to create the ideal wall fountain in a style resembling the typical Mediterranean look found in Italy, Spain, and France.

Placing these molded, cast stone concrete features on the floor against a wall is possible because they are sturdy and suitable for this kind of use. Built in the USA due to high shipping costs, they are generally available in a multitude of colors.

The Original Public Fountains

The water from creeks and other sources was initially delivered to the residents of nearby communities and municipalities by way of water fountains, whose design was mainly practical, not artistic. The force of gravity was the power source of water fountains up until the conclusion of the nineteenth century, using the forceful power of water traveling down hill from a spring or brook to push the water through valves or other outlets. Commonly used as memorials and commemorative edifices, water fountains have influenced travelers from all over the world throughout the centuries. Simple in design, the first water fountains did not look much like modern-day fountains. Crafted for drinking water and ceremonial purposes, the 1st fountains were very simple carved stone basins. 2000 B.C. is when the earliest identified stone fountain basins were actually used. The first fountains put to use in ancient civilizations relied on gravity to manipulate the flow of water through the fountain.

Located near reservoirs or creeks, the practical public water fountains furnished the local residents with fresh drinking water. Fountains with ornamental Gods, mythological monsters, and creatures began to show up in Rome in about 6 B.C., made from rock and bronze. Water for the public fountains of Rome was brought to the city via a intricate system of water aqueducts.

Water Transport Solutions in Early Rome

Rome’s first raised aqueduct, Aqua Anio Vetus, was built in 273 BC; before that, residents living at higher elevations had to depend on local springs for their water. When aqueducts or springs weren’t easily accessible, people living at higher elevations turned to water pulled from underground or rainwater, which was made possible by wells and cisterns. In the very early 16th century, the city began to utilize the water that ran beneath the earth through Acqua Vergine to supply water to Pincian Hill. Throughout the length of the aqueduct’s network were pozzi, or manholes, that gave entry. While these manholes were manufactured to make it less difficult to sustain the aqueduct, it was also possible to use buckets to remove water from the channel, which was exercised by Cardinal Marcello Crescenzi from the time he obtained the property in 1543 to his death in 1552. Whilst the cardinal also had a cistern to accumulate rainwater, it didn’t supply sufficient water. Fortunately, the aqueduct sat under his residence, and he had a shaft opened to give him accessibility.

The Multiple Types of Wall Fountains

A small patio or a courtyard is a great spot to situate your wall fountain when you seek peace and quiet. You can have one custom-built to suit your specifications even if you have a small amount of space. A spout, a water basin, internal piping, and a pump are vital for freestanding as well as mounted styles. Traditional, modern, classic, and Asian are just some of the styles from which you can choose.

Stand-alone wall fountains, commonly known as floor fountains, are considerably big and feature a basin on the ground.

You can choose to place your wall-mounted fountain on an preexisting wall or build it into a new wall. Incorporating this kind of water feature into your landscape adds a cohesiveness to the look you want to attain rather than making it seem as if the fountain was merely added later.

Short History of Fountains

You would definitely be hard pressed to find a human settlement that didn’t feature an outdoor water fountain, both sitting in the town square and weaved into its local stories. Prior to the introduction of indoor plumbing, these water features were the origin of the drinking water that many people required to survive. Townspeople are also driven to the fountains for their delicate shapes and sweeping water, gathering there to partake in prayer or even to make wishes. The water fountains are frequently thought to have the capability to purge the religious, and they play an essential part in the town’s security as well, providing water during military blockades. One of the most popular fountains is located at the Castalia temple in Delphi, which functions as a place for residents to assemble and socialize.


The Father Of Roman Fountain Design
There are numerous celebrated water fountains in the city center of Rome. Almost all of them were designed, architected and constructed by one of the greatest sculptors and artists of the 17th century, Gian Lorenzo Bernini. Also a city architect, he had skills ... read more
Agrippa's Eye-popping, but Mostly Forgotten Water-Lifting Technology
Unfortunately, Agrippa’s excellent plan for raising water was not discussed a great deal following 1588, when Andrea Bacci acknowledged it openly. It could be that the Acqua Felice, the second of Rome’s early modern aqueducts made the system obsolete... read more
Contemporary Statues in Historic Greece
Most sculptors were remunerated by the temples to enhance the elaborate pillars and archways with renderings of the gods until the stage came... read more
Cultural Statuary in Old Greece
Historically|Traditionally|In the past}, most sculptors were compensated by the temples to embellish the involved columns and archways with renderings of the gods, however as the period came to a close it became more common for sculptors to... read more
Ancient Greece: The Origins of Outdoor Statue Design
Though the majority of sculptors were compensated by the temples to adorn the detailed columns and archways with renderings of the gods, as the time period came to a close, it became more... read more