The Use of Outdoor Fountains As Water Features

a_525__07264.jpg The definition of a water feature is a big component which has water flowing in or through it. The broad variety of models available range from a simple hanging wall fountain to an elaborate courtyard tiered fountain. The versatility of this feature is useful since it can be placed inside or outdoors. Water features include ponds and pools as well.

Living areas including extensive yards, yoga studios, relaxing verandas, apartment balconies, or office settings are great places to add a water feature such as a garden wall fountain. There is nothing better to comfort you while also stimulating your senses of sight and hearing than the gratifying sounds of gently flowing water in your fountain. The most important consideration is the aesthetically beautiful form they have which accentuates the decor of any room. The sound of water provides contentment, covers up unwelcome noises and also provides an entertaining water show.

Your Outdoor Living Area: An Ideal Spot for a Fountain

A great way to enhance the appearance of your outdoor living area is to add a wall water feature or an exterior garden fountain to your landscaping or garden layout. Many modern designers and craftsmen have been influenced by historical fountains and water features. As such, introducing one of these to your interior is a great way to connect it to the past. The water and moisture garden fountains release into the atmosphere draws birds and other creatures, and also balances the ecosystem, all of which contribute to the advantages of having one of these beautiful water features. For example, birds attracted by a fountain or birdbath can be useful because they fend off annoying flying insects.

Putting in a wall water feature is your best option for a little garden because a spouting or cascading fountain takes up too much space. Either a freestanding fountain with an even back and an attached basin set against a fence or a wall, or a wall-mounted style which is self-contained and hangs on a wall, are some of the options from which you can choose. Adding a fountain to an existent wall requires that you add a fountain mask as well as a basin at the base to collect the water. Be sure to work with a specialist for this type of job since it is better not to do it yourself due to the intricate plumbing and masonry work needed.

Guidelines for Installing a Garden Water Fountain

Two things many people ignore when planning the installation of a garden fountain is a convenient water source and an electrical outlet in close proximity. People sometimes overlook the technical details because they get caught up in the excitement of putting in their newest purchase. Since standard power cords are only 12 feet in length, you might need to add an extension cord to reach the most convenient 120v outlet. You will need to replenish your fountain with water so make sure there is a source of water close by.

Hauling water is difficult and laborious. A nearby hose is helpful when time comes to fill the fountain. If you have an specialist on hand, you may want to look into getting a water fountain autofill with a connection to an external water line, as this would be much simpler in the long run.

The Best Technique to Install a Wall Water Feature

Just about any living space will benefit from the inclusion of a wall fountain. Peace and calmness will fill the room due to the comforting sound of the waterfall. Foyers are common places for wall fountains, but they can also be installed in any common living area. Although the instructions for putting one up are fairly straightforward there will be small variations depending on the model. Be sure that all the different parts are used in constructing it.

It will be necessary to connect the pump and tubing, and the base will need to be attached to the top section. The directions should be read first to make sure it is set up properly. It is typically a quick and easy procedure. That said, there can be small differences depending on the style you have. Have a friend hold the wall fountain in the desired location, then mark the wall accordingly. To ensure a straight line, use a level. Mark the wall where you want the very top of the wall fountain as well as the lower part. Your wall fountain can be mounted using one of two methods. You will notice holes on the back side of the wall fountain which can be hung directly onto the screws. A second option is use brackets secured on the wall. The bracket alternative is better, especially for wall fountains that are big and bulky. Mark the spot on the wall where the brackets need to be attached. To insert the drywall anchors, first drill pilot holes into the wall. Gently tap on the anchors with a hammer to insert them into the wall. Hold the brackets in position on the wall and use a cordless drill or screwdriver to attach them. Then, pick up your unit and fit it on the mounting brackets. Make sure that it is perfectly aligned and not loose. When you are certain the unit is stable, add water. There will need to be adequate water to cover the water pump. The water will start to move as soon as you plug in your fountain. The water should fill the basin to within an inch of the upper end. The basin will overflow when the pump is off if it is too full, so be certain not to fill it completely. The water level will rise since it all settles at the bottom of the basin if not being pumped. If the fountain is overly full, water can spill out and cause damage to the surrounding area.

The Roman Water Fountains of Michelangelo

Michelangelo and Ammannati, two celebrated Florentine maestros, crafted the first Roman wall fountains during the 16th century. The fountain in the Piazza del Campidoglio in Rome, which was finalized in 1536 and became part of the façade of the Palazzo Senatorio, was Michelangelo’s first creation. The construction of a conduit from the Aqua Felice to the Capitol, which allowed for a more beautiful water display, was included years later. Expecting this, Michelangelo had added a more sizable basin styled on the late Cinquecento.

Did the introduction of wall fountains begin with the famed artist? Italy’s fountains truly show the influence his designs had on the styles seen there. The styles found at the Fountain of the River Gods at the Villa Lante, Bagnaia 1, and the Fountain of the Mugnone, set between the stairway on the main axis of the Villa Pratolino, are other examples of this style.

Regrettably, Michelangelo was destined to put his own brilliance aside and combine conventional elements into fountains based on Roman styles. Julius III (1550-1555) decided to have a fountain built at the top of the Belvedere in the Vatican and commissioned the Florentine master to design a special wall fountain. The fountain was to be decorated with a marble sculpture of Moses striking a stone from which water flowed. Rather than building the Moses statue, which would take too much time to complete, an antique figure of Cleopatra was used in its place, however. An ancient figure was thought to be simpler to install over the fountain than the creation of a completely new statue by the famed artist.

Anglo Saxon Grounds at the Time of the Norman Conquest

The Anglo-Saxon way of life was significantly changed by the introduction of the Normans in the later eleventh century. Engineering and gardening were skills that the Normans excelled in, trumping that of the Anglo-Saxons at the time of the occupation. However, there was no time for home life, domesticated architecture, and decoration until the Normans had overcome the whole realm. Most often designed upon windy summits, castles were basic structures that enabled their inhabitants to spend time and space to offensive and defensive programs, while monasteries were rambling stone buildings frequently added in only the most fecund, broad valleys. Peaceful pastimes such as gardening were out of place in these desolate citadels. Berkeley Castle, perhaps the most uncorrupted model of the early Anglo-Norman style of architecture, still exists in the present day. The keep is said to date from William the Conqueror's time period. An enormous terrace encompasses the building, serving as an obstacle to assailants wanting to excavate under the castle walls. On 1 of these terraces sits a stylish bowling green: it is covered in grass and flanked by an old yew hedge that is created into the shape of rough ramparts.

The Wide Array of Outdoor Water Features

Convert your garden into what you have always wished for – an oasis of serenity. Add a feeling of tranquility to your garden with an exterior fountain and avail yourself of all the positive benefits of a water feature.

A dramatic impact is produced when a spouting fountain sends a shooting stream of water high into the air. Large, existing ponds can have one of these incorporated without much trouble. You can find these in community parks or old mansions.

Outdoor water features are available in different forms, one of which is a chic wall fountain. Such water features make for a fantastic addition to your yard even if it is small. Spouting fountains usually make quite an impact whereas wall features are more of a subtle type of water feature. In a very simple procedure, the water spills out of a spout, trickles down a beautifully textured wall only to be pumped back to the top.

Putting in a fountain with a theme depends completely on the layout of your garden. Consider a classic type of statue, such as a cherub supporting a spout, for the fountain if your residence or garden is rustic in style. Consider including something bolder and unique for a contemporary garden. Let your mind run free to select the best option.

The main characteristic of tiered fountains is the multiple levels spewing out water. Cascading fountains is another expression used to identify this type of fountain because water streams down multiple levels.

The space required for an outdoor fountain can be vast, therefore, a better alternative is to install a wall fountain or a pondless fountain. The reservoirs necessary for these kinds of fountains are concealed underground which helps you better use your limited space.

If you seek a feeling of peacefulness and calmness, put in a Japanese fountain as these are thought to bring about such sensations. Bamboo sticks are utilized in this sort of fountain to expel the water. Water then flows into a recipient or a shaped stone, only to repeat the cycle over and over again.

Glass fountains make up another group of fountain. Creating a more classical look are trellis-style fountains which showcase shaped metalwork. However, this style of water feature is better suited to backyard gardens with many sharp corners as well as modern-day forms and design. The flowing water produces a striking effect as it moves down the glass sheets. Some fountains also include colored LED lights to shine onto the sheets of glass as water streams downwards. With water softly flowing down its surface, rock waterfall fountains, often made of fake rock, are a viable solution for your garden.

Bubbling rock fountains are large rocks drilled with holes which are then filled with pipes in the middle. In this sort of fountain, water is forced upwards at low pressure to cause it to bubble and gurgle at the top. Water then streams as a gentle trickle down the sides of the rock to its base. This is yet another option for gardens with limited space. The low pressure used in this sort of fountain inhibits water from being spattered about in case of a windy day.

Solar fountains have recently gained in popularity because they are powered by the sun. The reasons for this are diverse, from the absence of wires and the reduced complexities to the decreased power bills and the beneficial impact on our environment. Outdoor solar-powered fountains are available in myriad different styles, therefore, you will not have to settle on which one to purchase.


The Intriguing Origin of the Wall Fountain
During his reign (1397-1455) in the capital of Italy,the scholar Pope Nicholas V (1397–1455) (directed|commissioned} scores of translations of ancient Greek classics into Latin. While the translations were undertaken, fresh water was supplied to the... read more
Gardens of Chatworth and the "Revelation" Water Fountain
Angela Conner, the well-known British sculptor, crafted “Revelation,” the most recent addition to the appealing exterior fountains of Chatsworth. In 2004/5 she was commissioned by the late 11th Duke of Devonshire to design a limited edition bust of Queen... read more
The Circulation of Outdoor Garden Fountain Industrial Knowledge in Europe
Instrumental to the development of scientific technology were the published papers and illustrated publications of the day. They were also the main means of... read more
Garden Fountain Engineers Through History
Multi-talented people, fountain artists from the 16th to the late 18th century often served as architects, sculptors, artists, engineers and highly educated scholars all in one. Leonardo da Vinci as a inspired master, inventor and... read more
Water-lifting Tool by Camillo Agrippa
In 1588, Agrippa’s water-lifting creation lured the interest and approval of Andrea Bacci but that turned out to be one of the last references of the... read more
Wall Fountains: The Minoan Culture
Fountains and Water and the Minoan Civilization They were used for water supply as well as removal of storm water and wastewater. Rock and terracotta were the materials of choice for these conduits. Whenever made from clay, they were commonly in... read more