The Right Method to Hang a Wall Water Element

Beautify virtually any space with the addition of a wall fountain. The effects of the water sounds include bringing tranquility and calm to the room. Foyers are common places for wall fountains, but they can also be hung in any common living area. Even though each model might have slight differences on how to hang it, the standard instructions are the same for all. Be sure that all the different pieces are used in building it. 2953_on_2932__47531.jpg It will be necessary to connect the pump and tubing, and the base will need to be connected to the top section. Do not forget to review the guidelines before getting started in order to avert errors. The assembly work is quite simple to understand. Keep in mind, though, that each design might need a slight adjustment. Another person can be useful to hold the wall fountain in the right position so that you can mark the wall. The best way to ensure it is hung correctly is to use a level. It is recommended to mark both the bottom and the top positions. Wall fountains can be hung in more than just one way. You can place the screws in the wall and glide them into the holes on the back of the wall fountain. Alternatively, you might want to attach brackets to the wall and use those. The bracket option is best, particularly for wall fountains that are big and bulky. Make a mark on the wall where the brackets will best go on your wall fountain. Drill pilot holes in the wall wherever you need to set the drywall anchors. Affix the anchors by correctly hammering them into the wall. Affix the brackets by making sure they are straight and then screwing them into the wall with a drill or screwdriver. It is finally time to place your wall fountain onto the mounting brackets. Be certain that it is properly straight and not loose. If the alignment is correct, it’s time to add water. Make certain there is enough water to cover the pump. Then plug it in and the water will start to circulate. The water should fill the basin to within an inch of the top. The basin will overflow when the pump is shut off if it is too full, so be careful not to fill it completely.

When the water is not being pumped, it all settles at the bottom which causes the water level to rise. Damage can be be the result if the water is overly full and flows down your wall.

Choosing the Ideal Material for your Wall Water Fountain

Choose the best suited wall fountain for you from the variety of materials available on the market. Fiberglass is an outstanding choice because this material is strong, light and waterproof. One of the added benefits of this type of fountain is that it is easy to transport and does not need a large vehicle to deliver it.

Although a large part of them are made of metal, including copper, other appropriate materials include stone, clay, and wood. The best material for your fountain remains copper, although it has become quite expensive due to recent price hikes. Cast stone is normally used in wall fountains to reproduce the look of classic Mediterranean fountains such as those seen in Italy, Spain, and France. These very durable molded features made of cast stone concrete are perfect if you need to place the fountain on the floor against a wall. Generally, they are available in a variety of colors and built in the USA because they are expensive to ship.

The Myriad Styles of Water Wall Fountains

Small verandas or courtyards are an ideal place to set up wall fountains because they add style to an area with little space. Whatever design of outdoor wall fountain you are searching for whether it be traditional, contemporary, classic, or Asian you will undoubtedly find the one you like most. If you are looking for a unique design, a customized one can be specially made to meet your specifications.

Mounted and stand-alone fountains are available on the market. Small, self-contained mounted wall fountains can be installed on any surface. Wall fountains made of resin (resembling stone) or fiberglass are usually lightweight so they can be easily hung. Free-standing fountains, often referred to as floor fountains, are sizable, have a basin positioned on the ground and a smooth side which leans against a wall. Generally composed of cast stone, this type of water feature is not restricted in weight.

Custom-built fountains which can be integrated into a new or existing wall are often prescribed by landscaping designers. The basin and all the required plumbing are best installed by a qualified mason. You will need to integrate a spout or fountain mask into the wall. If you want a cohesive look for your garden, get a customized wall fountain because it becomes part of the panorama rather than a later addition.

Indoor Wall Water Elements are Great for House or Office

One way to embellish your home with a modern twist is by adding an indoor wall fountain to your living area. Installing this kind of fountain in your home or office permits you to create an area for your loved ones and clientele where there is little noise as well as minimal stress and maximum relaxation. Your staff and customers alike will take notice and complement your new indoor wall water feature. In order to get a positive reaction from your loudest critic and impress all those around, install an interior water feature to get the job done.

While sitting underneath your wall fountain you can delight in the peace it provides after a long day's work and enjoy watching your favorite sporting event. The benefits of an indoor water feature include its ability to release negative ions with its gentle sounds and clear away dust and pollen from the air while creating a soothing setting.

Reasons to Consider Installing a Pondless Water Fountain

The name “pondless fountain” is just another way to refer to a disappearing fountain. The source of the water is not visible because it is below the surface of the ground. An ideal place for a disappearing fountain is anywhere that gets steady foot traffic, as it adds lovely visual and sound effects to the surroundings. They come in an array of distinct styles including waterfalls, columns made of granite, ceramic pots, and millstones.

Disappearing fountains also come with many benefits. The water comes from underground and does not form a large pool above ground so any risk to those around it is reduced. For this reason, it presents no threat to children. Moreover, no water can evaporate because it is not exposed to the open air. This type of fountain, therefore, is a good choice for regions where there is a need to conserve water. This type of fountain is perfect if you do not have a lot of time to clean it often since neither debris nor algae can get to it underground. Last but not least, because of its small size it can fit almost anywhere you want.

The Latest Addition to the Chatsworth Gardens: "Revelation"

The well-known British sculptor Angela Conner created the Chatsworth decorative exterior fountain called “Revelation.” In celebration of the Queen’s 80th birthday celebration, she was commissioned by the late 11th Duke of Devonshire to build a limited edition bust of Queen Elizabeth made of brass and steel in 2004. Jack Pond, one of Chatsworth’s most venerable ponds, had “Revelation” placed in 1999. Taking the form of four large petals that open and close with the flow of water, the metal water feature alternatively hides and displays a golden globe at the center of the sculpture. Standing five meters high and five meters wide, the globe was built from steel and then coated with gold dust. This most recent water fountain is a fascinating addition to the Chatsworth Gardens because the petals’ movement is totally powered by water.

Get Lost in the Sounds of Musical Fountains

An animated musical fountain, also referred to as a dancing fountain which additionally creates three-dimensional images, is generally used for recreational purposes. Timed light, including lasers, and sound waves which hit water molecules, produces phenomenal displays. In order to create the three-dimensional imagery, the water needs to refract and reflect the light.

Such large-scale installations, use hundreds of water jets and lights, and can cost into the millions of dollars. Musical features can be quite complicated and require a certain degree of mechanical, hydraulic, electrical, and electronic pieces that just may be more amazing to the audience than the actual show!

The jaw-dropping musical fountain in Dubai is without a doubt the largest such project in the world. Designed by California based WET Design, which also developed the celebrated Las Vegas fountain at the Bellagio Hotel, it spans the 30-acre man-made Burj Khalifa Lake. This massive fountain has 6,600 lights, 25 colored projectors, fog and fire. Sending water 150 meters (490 feet, comparable to a 50-story building) into the sky, it measures 207-meters (902 feet) and integrates music such as classical pieces, modern Arabic music as well as world music. The end cost was estimated at 218 million dollars. The Dubai Mall and the fountain were formally launched on May 8, 2009 by Sheikh Mohammed bin Rashid Al Maktoum. The best glimpse of the fountain, positioned in front of the Burj Khalifa, is from the Souk Al Bahar or the Dubai Mall.


The Interesting Origin of the Wall Water Fountain
During his reign (1397-1455) in the capital of Italy,the learned Pope Nicholas V (1397–1455) (directed|commissioned} hundreds of translations of historical Greek classics into Latin. While the translations were completed, fresh water was supplied to the... read more
Gardens of Chatworth and the "Revelation" Fountain
Designed by celebrated English sculptor Angela Conner, Revelation is the most recent addition to the Chatsworth decorative outdoor water features. The late 11th Duke of Devonshire commissioned her, because of her work in brass and... read more
"Old School" Water Feature Creative Designers
Multi-talented individuals, fountain artists from the 16th to the late 18th century typically served as architects, sculptors, artists, engineers and cultivated scholars all in one person. Exemplifying the Renaissance skilled artist as a... read more
Gian Lorenzo Bernini's Public Fountains
There are any number of famed Roman water features in its city center. One of the best ever sculptors and artists of the 17th century, almost all of them were designed, conceptualized and built by Gian Lorenzo Bernini.... read more
A Short History of the First Garden Fountains
Water fountains were initially practical in purpose, used to convey water from canals or springs to towns and villages, providing the residents with clean water to drink, wash, and prepare food... read more