The Elegance of Simple Garden Decor: The Garden Water fountain

Nowadays you can just put your garden water fountain near a wall since they no longer need to be hooked to a pond. Moreover, it is no longer necessary to dig, deal with a difficult installation process or clean the pond. There is no plumbing work necessary with this type self-sufficient water feature. All the same, water must be added regularly. 7231325__87391.jpg Clear away the water from the basin and place clear water in its place when you see that the space is grimy.

The most utilized materials used to manufacture garden wall fountains are stone and metal, even though they can be made out of any number of other elements. The design you are looking for determines which material is most appropriate to meet your needs. It is best to shop for exterior wall fountains which are easy to install, handmade and lightweight. The water feature you buy needs to be easy to maintain as well. While there may be some instances in which the setup needs a bit more care, generally the majority require a minimal amount of effort to install since the only two parts which demand scrutiny are the re-circulating pump and the hanging hardware. You can rest assured your garden can be easily enlivened by installing this type of fountain.

The Prevalence of Japanese Water Features

You will rarely see a Japanese garden that does not feature a water element. You will often notice Japanese water fountains in the doorway of a temple or home due to the fact that they are thought to be symbolic of physical and spiritual cleansing. Since water is the most essential element of any Japanese fountain, the design is generally simple.

Many people also get a water fountain that features a bamboo spout. The bamboo spout is placed over the basin, typically crafted of natural rocks, and water trickles out. Even when new, it should be designed to appear as if it has been outdoors for a long time. Natural elements such as plants and rocks are often put in place around a fountain so that it seems more in line with nature. Clearly this fountain is much more than merely a pretty add-on.

If you are looking for another sort of look and feel, you can also get a fountain made of stone, place it in a bed of gravel, and decorate it with natural stones and live bamboo. Over the years it begins to really blend into the surrounding nature as moss covers the stone.

Wherever there is enough open space, you have the possibility to build a more extensive water feature. Lots of people add a koi pond or a small stream as a final touch.

Water, nevertheless, does not have to be used in a Japanese fountain. Pretty rocks, sand, or gravel are ideal alternatives to actual water, as they can be used to represent the water. You can also gather flat stones and position them close enough together that they look like water in motion.

Fountains Having Various Levels

Gardens are popular places to put up a multi-tiered fountain, a style which has historically been very fashionable. The countries in the southern portion of Europe tend to have a lot of these types of fountains. While they can be located anywhere, they are most prevalent in the center of building complexes and in popular areas where people get together. Tiered fountains come in a wide range of designs, from elaborately carved styles to relatively plain types.

Any area can be embellished with one, even though a more traditional setting is sometimes more appropriate. It should look as if the fountain has been part of the decor since the beginning and should blend in accordingly.

Original Water Delivery Techniques in The City Of Rome

With the development of the first raised aqueduct in Rome, the Aqua Anio Vetus in 273 BC, folks who lived on the city’s hills no longer had to rely only on naturally-occurring spring water for their needs.

During this time period, there were only two other technologies capable of delivering water to elevated areas, subterranean wells and cisterns, which amassed rainwater. From the beginning of the sixteenth century, water was routed to Pincian Hill by using the subterranean channel of Acqua Vergine. The aqueduct’s channel was made attainable by pozzi, or manholes, that were added along its length when it was initially developed. During the some 9 years he possessed the property, from 1543 to 1552, Cardinal Marcello Crescenzi utilized these manholes to take water from the channel in buckets, though they were actually established for the function of maintaining and maintaining the aqueduct. He didn’t get adequate water from the cistern that he had manufactured on his residential property to gather rainwater. Thankfully, the aqueduct sat below his residence, and he had a shaft opened to give him accessibility.

Guidelines for Hanging a Wall Water Fountain

Enhance nearly any room with the addition of a wall fountain. The relaxing sound of the waterfall will relax and sooth. While any area will benefit from a wall fountain, they are most often put in entryways. Although each model might have slight differences on how to install it, the basic instructions are the same for all. There are normally several parts that need to be assembled. Once you connect the base and the top you will then need to attach the pump and the water tubes. The directions should be read first to make sure it is set up right. The assembly work is quite simple to understand. That said, there can be slight differences depending on the design you have. Another person can be helpful to hold the wall fountain in the right position so that you can mark the wall. To facilitate a proper line, use a level. Both the very top and the lower part should be marked. There is more than a single method to mount a wall fountain. You will see slots on the back side of the wall fountain which can be mounted directly onto the screws.

Alternatively, you could attach brackets to the wall and use those. The second option is best, especially for bigger wall fountains. Mark the point on the wall where the brackets need to be installed. Drill pilot holes in the wall wherever you need to place the drywall anchors. Carefully hammer the anchors into the wall. Affix the brackets by ensuring they are straight and then screwing them into the wall with a drill or screwdriver. At this point, pick up your unit and fit it on the mounting brackets. Ensure that it is properly mounted and straight. If the alignment is right, it’s time to add some water. There should be adequate water to cover the water pump. It is now time to plug it in and observe the water circulate. The water should fill the basin to within an inch of the very top. Do not fill the basin all the way to the top or it will overflow whenever the pump is not on. Whenever the pump is off the water all settles at the bottom of the bowl, causing the water level to rise. Harm can be be the result if the water is overly full and overflows down your wall.

Michelangelo’s Roman Wall Fountains

During the 16th century two renown Florentine artists by the names of Michelangelo and Ammannati built the first wall features in Rome. The earliest fountain Michelangelo made came in 1536 with the construction of the Campidoglio in Rome which was to be part of the Palazzo Senatorio's façade. A conduit from the Aqua Felice was built later and it carried water to the Capitol making a more lavish water effect possible. Michelangelo had foreseen this, however, and added a bigger basin styled on the art of the late Cinquecento.

Did the introduction of wall fountains begin with the famed artist? Italy’s fountains certainly show the influence his designs had on the styles found there. The Fountain of the River Gods at the Villa Lante, Bagnaia 1, and the Fountain of the Mugnone found between flights of stairs on the main axis of the Villa Pratolino are further models of this type of structure.

It seemed to be Michelangelo’s destiny to combine classic Roman attributes into his fountains instead of using his own tremendous talents to design original pieces. The Florentine master was instructed by Julius III (1550-1555) to design a unique fountain to be placed at the top of the passageway of the Belvedere in the Vatican. The fountain was to be decorated with a marble depiction of Moses striking a stone from which water flowed. The option of the Moses figure was abandoned, however, because of the time it would take to build it and was therefore replaced by an antique image of Cleopatra. A design by the well-known artist was thought to be too time-consuming, therefore, an ancient figure placed above the fountain seemed to be a better option.

Garden Water Elements for your Place of Business

Your business environment can benefit with a garden fountain. A pretty one will make your commercial space feel warm and welcoming. Places of business, in contrast to non-commercial areas, need outdoor fountains that are both impressive as well as inviting to clients and staff alike.

In order to drive corporate success, a company must constantly strive to attract new clients and impress them right away. Do not be concerned if you only have a small space, adding a garden water fountain and some beautiful flowers will go a long way. Even larger, more alluring garden displays can be set up in corporate areas that have more open space available. Some companies, though, have to make due with a tiny area.

In the end, the key goal is to design an atmosphere that attracts new interest in your business. An attractive garden fountain is like having a welcoming committee for new clients outside your workplace at all times.


Chatsworth Gardens and the "Revelation" Fountain
The popular UK sculptor Angela Conner planned the Chatsworth decorative exterior water feature called “Revelation.” The now deceased 11th Duke of Devonshire commissioned her, due to her work in brass... read more
Gardens of Chatworth: The Revelation Water Fountain
Angela Conner, the well-known British sculptor, fashioned “Revelation,” the newest addition to the ornamental outdoor fountains of Chatsworth. In commemoration of the Queen’s 80th birthday celebration, she was... read more
The Godfather Of Roman Garden Fountains
In Rome’s city center, there are countless easily recognized water fountains. One of the most distinguished sculptors and artists of the 17th century, Gian Lorenzo... read more
The City Of Rome, Gian Bernini, And Public Fountains
There are numerous famous water fountains in Rome’s city center. Gian Lorenzo Bernini, one of the finest sculptors and artists of the 17th century planned, conceived... read more
Rome, Gian Lorenzo Bernini, And Statuary Fountains
In Rome’s city center, there are many famous fountains. One of the best ever sculptors and artists of the 17th century, Gian Lorenzo Bernini planned, conceived and constructed almost... read more