The Right Method to Mount a Wall Water Element

Make any room much better with a wall fountain. The effects of the water sounds include bringing serenity and calm to the room. twf005__50887.jpg While any space will benefit from a wall fountain, they are most often put in entryways. How to mount one varies a bit depending on the model, but there are some general instructions that apply to all of them. There are usually several parts that need to be assembled. You will need to connect the pump and tubing, and the base will need to be connected to the top section. Remember to review the guidelines before getting started in order to avert problems. It is typically a simple procedure. Keep in mind, though, that each style might require a slight adjustment. Another person can be useful to hold the wall fountain in the appropriate place so that you can mark the wall. To ensure a proper line, use a level. Mark the wall where you want the top of the wall fountain as well as the base. There is more than a single way to mount a wall fountain. There are slots on the back which can be placed onto the screws you place on the wall. Alternatively, you can affix brackets to the wall and use those. This last one is the more advisable way, particularly if your fountain is large. Put a spot on the wall where the brackets will best fit on your wall fountain. Drill pilot holes in the wall for your drywall anchors. Gently hammer the anchors into your wall. Use a cordless drill or a screwdriver to mount the brackets, making sure they are straight. Mount your wall fountain by securing it onto the brackets. Ensure that it is firmly mounted and straight. Put in water once the wall fountain is ready. The pump should be completely immersed under water. It is now time to plug it in and watch the water trickle. Gently pour in more water until it comes within an inch of the top of the basin.

Note that it will overflow when not pumping if you fill it to the top. The water level will rise because it all settles at the bottom of the basin when not getting pumped. If the fountain is too full, water can spill out and cause damage to the nearby area.

What Are Large Outdoor Fountains Manufactured From?

Though they come in different materials, contemporary garden fountains tend to be made of metal. Those made from metals have clean lines and attractive sculptural elements, and are flexible enough to fit any budget and decor. It is very important that your landscape reflects the style of your home.

Presently, copper is quite common for sculptural garden fountains. Copper is appropriate for many fountain styles, including tabletop and cascade water fountains, and can be placed inside or outside - making it a great choice. If you decide to go with copper, your fountain can be any style from fun and whimsical to cutting-edge.

Brass water fountains are also common, though they tend to have a more traditional look than copper ones.

Though not the most modern, the creatures and sculptural features you find on fountains are commonly made of brass, thus making them very popular.

Of all the metals, stainless steel is recognized as the most contemporary-looking. For an instantaneous increase in the value and serenity of your garden, get one of the contemporary steel designs. As with all fountains, you can find any size you choose.

For people who want the visual appeal of a metal fountain but desire a lighter weight and more affordable option, fiberglass is the answer. It is easy to clean and maintain a fiberglass water fountain, yet another reason they are common.

Short History of Fountains

Water Fountains have long held a role in communities around the globe, serving as an important supply of drinking water and even making appearances in folktales. Fountains offered essential drinking water in the times when people did not yet have access to fresh water in their homes. These exquisitely designed fountains are also a place to pray, make wishes, or just to love the sight and sound of the running water. Water fountains have other religious uses, including purifying worshipers during rituals, as well as military functions, such as helping the town to endure blockades. These water fountains are furthermore a setting for townspeople to socialize, like at the fountain at Castalia in Delphi.

What is the Ideal Material for your Wall Water Fountain?

Picking the best material for your wall mounted fountain is completely up to you. When you are looking for a sturdy, light, waterproof material, fiberglass is your ideal option. One of the added benefits of this type of fountain is that it is easy to transport and does not require a large vehicle to deliver it.

There are many materials that can be used in crafting them, including stone, clay, wood, and metals such as copper, although most indoor ones are made of some sort of metal. The best material for your fountain remains copper, although it has become quite pricey due to recent price increases. Cast stone is the best material to craft the ideal wall fountain in a style resembling the classic Mediterranean look found in Italy, Spain, and France. You can set these durable cast stone concrete features on the ground against a wall as they are suitable for this purpose. Generally, they are available in a variety of colors and built in the USA because they are costly to ship.

Caring For Garden Water fountains

Setting up an outdoor wall fountain requires that you bear in mind the dimensions of the space where you are going to put it. A strong wall is absolutely needed to hold up its total weight. Therefore for smaller areas or walls, a more lightweight fountain is going to be more appropriate. An electric socket close to the fountain is required to power the fountain. Since there are many kinds of outdoor wall fountains, installation procedures vary, but the majority include user-friendly instructions.

Generally, when you purchase an outdoor wall fountain, it will come in an easy-to-use kit that will include all the information needed to install it correctly. A submersible pump, hoses and basin, or reservoir, are provided in the kit. Depending on its size, the basin can typically be hidden quite easily amongst the plants. Since outdoor wall fountains require little attention, the only thing left to do is clean it consistently.

Change the water regularly so it is always clean. It is important to quickly remove debris such as leaves, twigs or other dreck. Make sure that your outdoor wall fountain is shielded from bitterly cold winter temperatures. Your pump may crack when subjected to freezing water during the winter, so it is best to bring it indoors to prevent any damage. Simply put, your outdoor fountain will be a part of your life for many years to come with the correct care and maintenance.

The Dissemination of Water Fountain Design Knowledge

Spreading practical hydraulic facts and fountain design ideas throughout Europe was accomplished with the published documents and illustrated publications of the time. In the later part of the 1500's, a French water feature designer (whose name has been lost) was the internationally recognized hydraulics pioneer. By creating landscapes and grottoes with built-in and clever water features, he began his profession in Italy by earning imperial commissions in Brussels, London and Germany. In France, near the closure of his life, he wrote “The Principle of Moving Forces”, a book that became the primary text on hydraulic technology and engineering. Classical antiquity hydraulic breakthroughs were elaborated as well as updates to essential classical antiquity hydraulic breakthroughs in the book. Archimedes, the inventor of the water screw, had his work highlighted and these included a mechanical way to move water. Sunlight heated up the liquid in a pair of concealed vessels next to the ornamental fountain were shown in an illustration. What occurs is the hot liquid expanded, rises and locks up the pipes heading to the water feature, thereby leading to stimulation. Models for pumps, water wheels, water features and garden ponds are also covered in the publication.

The Brilliance of Michelangelo’s Roman Wall Fountains

During the 16th century two renown Florentine artists by the names of Michelangelo and Ammannati designed the first wall fountains in Rome. The first fountain Michelangelo made came in 1536 with the construction of the Campidoglio in Rome which was to make part of the Palazzo Senatorio's façade. A conduit from the Aqua Felice was constructed later and it delivered water to the Capitol making a more lavish water effect possible. Styled on the late Cinquecento, Michelangelo created a larger basin, anticipating the building of the conduit.

Was the famed maestro the inventor of the wall fountain? Italy’s fountains certainly show the impact his designs had on the styles found there. Today, this structural style is found at the Fountain of the River Gods at the Villa Lante, Bagnaia 1, and the Fountain of the Mugnone arranged among the stairs on the principal axis of the Villa Pratolino.

Regrettably, Michelangelo was destined to put his own brilliance aside and combine traditional elements into fountains based on Roman styles. Julius III (1550-1555) decided to have a fountain erected at the top of the Belvedere in the Vatican and instructed the Florentine artist to design a one-of-a-kind wall fountain. A marble figure of Moses striking a stone streaming water was to be built as embellishment for the fountain. However, an ancient sculpture of Cleopatra replaced the depiction of Moses because the latter would take too much time make. An ancient figure was thought to be simpler to erect over the fountain than the creation of a completely new statue by the famed artist.


The Revelation Garden Fountain at Chatsworth Gardens
Designed by celebrated English sculptor Angela Conner, "Revelation" is the latest addition to the Chatsworth ornamental exterior water features. The late 11th Duke of Devonshire commissioned her, because of her... read more
The Distribution of Garden Water Fountains Manufacturing Knowledge in Europe
The published documents and illustrated pamphlets of the day contributed to the evolution of scientific innovation, and were the primary means of transmitting... read more
The Father Of Rome's Public Fountain Design And Style
There are numerous renowned water fountains in Rome’s city center. Gian Lorenzo Bernini, one of the best sculptors and artists of the 17th century developed,... read more
Water Transport Strategies in Early Rome
Aqua Anio Vetus, the first raised aqueduct assembled in Rome, commenced delivering the many people living in the hills with water in 273 BC, though they had relied... read more