The Recommended Method to Install a Wall Water Feature

Beautify virtually any space with the addition of a wall fountain. The calming sound of the waterfall will relax and sooth. Entryways are common places for wall fountains, but they can also be hung in any common living area. a-265__49444.jpg The best way to hang one depends on the design, but the standard process is the same. There are normally several parts that need to be assembled. The foundation and the upper portion will need to be put together as well as the pump and the tubing. The directions should be read first to make sure it is put together correctly. It is normally a straight-forward process. That said, there can be minor differences depending on which model you have. Have a friend hold the wall fountain in the desired spot, then mark the wall appropriately. To ensure a straight line, use a level. Both the very top and the base should be marked. Your wall fountain can be installed using one of two methods. The first is to utilize screws which you glide right into the slots on the back. Alternatively, brackets can be fixed to the wall. This last one is the more advisable way, particularly if your fountain is large. Mark the point on the wall where the brackets need to be mounted. Bore pilot holes in the wall wherever you need to position the drywall anchors. Insert the anchors by carefully hammering them into the wall. Use a cordless drill or a screwdriver to mount the brackets, making certain they are straight. Now, hoist your unit and hang it on the mounting brackets. Be certain that it is perfectly straight and not loose. Put in water once the wall fountain is up.

Use sufficient water so that the pump is entirely covered. It is now time to plug it in and observe the water trickle. Slowly pour in just enough water to reach one inch below the top edge of the basin. The basin will overflow when the pump is switched off if it is too full, so be careful not to fill it completely. The water level will rise because all of the flowing water will settle down at the base of the basin. The water will overflow and cause property damage if the wall fountain is overly full.

The Interesting Origin of the Wall Water Fountain

During his reign (1397-1455) in the capital of Italy,the learned Pope Nicholas V (1397–1455) (directed|commissioned} hundreds of translations of early Greek classics into Latin. The ruined Roman aqueduct, Acqua Vergine, was put into use for getting fresh drinking water to the city from a extended distance of 8 miles and he started rebuilding it in 1453. In addition, he re-started the Roman custom of marking the terminal point of an aqueduct with a mostra, a commemorative water fountain with a distinct appearance. Architect Leon Alberti was commissioned to develop a wall fountain, a undertaking which grew in size and scope until it became the famous Trevi Fountain of Rome. Pope Nicholas V's commitment to making Rome the focus of the Christian community, and provide a source of quality drinking water to her residents led to the first wall fountain.

Gardens of Chatworth: The Revelation Garden Fountain

Created by celebrated British sculptor Angela Conner, "Revelation" is the latest addition to the Chatsworth ornamental exterior water features. In 2004/2005 she was commissioned by the now deceased 11th Duke of Devonshire to create a limited edition bust of Queen Elizabeth, in brass and steel, for the Queen’s 80th birthday celebration. In 1999 Revelation was mounted in Jack Pond, one of Chatsworth’s first ponds. Alternatively concealing and revealing a golden globe at the sculpture’s heart, the metallic fountain takes on the shape of four large flower petals which open and close with the movement of water. Standing five meters high and five meters wide, the globe was made from steel and then painted with gold dust. The petals move based on the circulation of water, making this installation an exciting addition to the Gardens of Chatsworth.

The Many Construction Materials of Fountains

Although they come in various materials, modern garden fountains tend to be made of metal. Metallic fountains, with their clean lines and sculptural accents, come in in a variety of metals and can accommodate any style or budget. The interior design of your residence should determine the look and feel of your yard and garden as well.

At present, copper is extremely prevalent for sculptural garden fountains. Copper is used in cascade and tabletop water fountains as well as various other styles, making it perfect for inside and outside fountains. If you choose to go with copper, your fountain can be any style from fun and whimsical to modern.

Brass water fountains are also common, although they tend to have a more classic look than copper ones. Although it is not the most stylish, the creatures and sculptural features you find on fountains are commonly made of brass, thus making them very popular.

Most people today see stainless steel as the most modern option. If you pick a cutting-edge steel design, both the value and tranquility of your garden will get a nice lift. Just like other water features, they come in an array of sizes.

Fiberglass fountains are widespread because they look similar to metal but are more affordable and much less cumbersome to move around. Keeping a fiberglass water fountain clean and working correctly is quite easy, another aspect consumers like.

The Understated Appeal of the Wall Fountain

A wall fountain can be an important design element in your home or office, enough so that it makes a good impression on your family and friends alike. Having a wall water feature in your daily life not only stimulates the eyes with its beauty but also your ears with the gentle background sounds it creates. Imagine the positive effects it will have on visitors when they experience its wondrous sights and sounds.

A living area with a modern-day theme can also benefit from a wall fountain. They can also add a touch of elegance to your decor since they are also built in modern-day materials including glass and stainless steel. Does your home or workplace have a limited amount of space? A wall water fountain might be the ideal option for you. You can save your limited space by putting one on a wall. Commercial buildings with busy lobbies generally have one of these fountains. Indoor spaces are not the only places to hang a wall fountain, however. Exterior wall water features can be manufactured of fiberglass or resin. Liven up your veranda, courtyard, or other exterior areas with a water fountain made of these weather-proof materials.

Wall fountains can be manufactured in a wide array of different styles ranging from contemporary to classic and provincial. The type most appropriate for your living space depends solely on your personal decoration ideas. The materials utilzed to decorate a mountain lodge differ from that needed to beautify a high-rise apartment, the former perhaps requiring slate and the latter better served with sleek glass. It is up to you to choose the ideal material for you. There is no questioning the fact that fountains are features which impress visitors and add to your quality of life.

Animals and Backyard Fountains

If you are thinking about getting a water feature, ensure that your pets like it. Your stand-alone fountain may be taken for a big pool or a drinking pond by your pooch. Think about fitting a water element in your backyard since it is a feature that will impact your treasured pets positively. Your fountain may fascinate birds who think it is a fantastic place to cool down, so it is important to think about where you will place this type of water feature. Install a birdbath if your goal is to draw birds to your garden. Setting up a wall water fountain inside your house is a good solution if you want to avoid such concerns. Exclusive mansions, in addition to dentist’ and doctors’ practices, often have such fountains on display.

The Benefits of Pond Fountains

When someone mentions fountains, you usually think of the big sculptured ones found in parks, in front of hotels, etc. That said, in reality they can be made of any style and size, and do not only belong in public areas. Your very own flower garden or yard can be a ideal spot for a pond fountain.

Two primary benefits can result from setting up one of your own. To begin with, fountains add elegance and help everyone chill out. What you need at the end of a rough day is the comforting sound of the water and a tranquil ambiance. The environment will get a bit more elegant, too. Moreover, your beautiful fountain will encourage your guests to gather around and take photos, making your get-togethers even more entertaining.

Another good reason to add this type of water element is to keep the water in your pond heathier for your fish. Fish are a lot better off if their water is circulating around and getting oxygen, and a pond fountain will do both of those things. Your fish will be around a longer time because of the continuously moving, aerated water. You should see healthier plant life too.


The Dissemination of Water Fountain Design Technology
The published documents and illustrated publications of the time contributed to the advancements of scientific innovation, and were the primary means of... read more
The Original Outdoor Water Feature Designers
Often serving as architects, sculptors, artists, engineers and highly educated scholars all in one, from the 16th to the later part of the 18th century, fountain designers... read more
The Early Culture: Garden Fountains
On the Greek island of Crete, excavations have unearthed channels of multiple varieties. These were applied to supply cities with water as well as to reduce flooding and get rid of waste material. The chief ingredients utilized were... read more
Attributes of Garden Sculpture in Archaic Greece
Archaic Greeks were renowned for developing the first freestanding statuary; up till then, most carvings were made out of walls and pillars as... read more
The Earliest Recorded Outdoor Water Fountains of History
Villages and communities relied on functional water fountains to funnel water for cooking, washing, and cleaning up from nearby sources like lakes, channels, or creeks. To make water flow through a... read more