Chatsworth Garden: The Cascade Water Fountain

ft-247__69807.jpg Providing a fantastic center of attention to the landscape at the back of Chatsworth House is the Cascade garden fountain. Twenty-four irregularly spaced stone steps reach down the hillside for 200 yards in the direction of the residence. The Cascade, also completely gravity fed, is founded on a 17th century French concept. This water fountain has continued unmodified after being Created for the first Duke of Devonshire in 1696. The Cascade House overlooks the fountain, where water gently moves downward. Ornamented on the outside of the house with underwater creatures in bas-relief, the dwelling is a small construction. Leading to the Cascade House to become part of the Cascade pageant, on important occasions water pressure to the Cascade can be increased, as liquid passes through piping on its roof and from the mouths of its carved deep-sea creatures, before continuing down the Cascade. The size of every single step was made slightly different and means that the music of the water cascading varies as it descends the Cascades, providing a remarkable and soothing accompaniment to a stroll through the gardens. In 2004, Chatsworth's Cascade was voted the best water feature in England.

Agrippa’s Magnificent Water-lifting Appliance

In 1588, Agrippa’s water-lifting creation captivated the notice and approval of Andrea Bacci but that turned out to be one of the final mentions of the device. It could perhaps be that in 1592 when Rome’s most recent waterway, the Acqua Felice, set about providing the Villa Medici, there was no longer very much use for the system. Although its triumph was short lived, Camillo Agrippa’s concept for raising water was the wonder of its day, exceeding anything crafted in Italy since the days of classic Rome. While there were other relevant water-driven designs either designed or built during the later part of the sixteenth century, such as scenographic water presentations, giochi d’acqua or water caprices, and melodious fountains, not one was nourished by water like Agrippa’s device.

Caring For Garden Fountains

Setting up an outdoor wall fountain requires that you take into account the dimensions of the space where you are going to put it. It is essential that the wall where you are going to place it is sturdy enough to support its load. Therefore for smaller areas or walls, a more lightweight fountain is going to be more suitable. You will need to have an electrical outlet in the vicinity of the fountain so it can be powered. Most outdoor wall fountains come with simple, step-by-step instructions according to the type of fountain.

All you will require to correctly install your outdoor wall fountain is typically provided in easy-to-use kits. A submersible pump, hoses and basin, or reservoir, are provided in the kit. The basin, if it's not too large, can easily be concealedin your garden among the plants. Since outdoor wall fountains require little attention, the only thing left to do is clean it regularly.

It is essential to replenish the water consistently so that it stays clean. Leaves, branches or dirt are examples of rubbish which should be cleared away quickly. Safeguarding your outdoor wall fountain from the cold winter weather is vital. In order to avoid any damage, such as cracking, from freezing water during the cold winter season, relocate your pump inside. To sum up, your outdoor wall fountain will continue to be an amazing addition to your garden if you keep it well cared for and well maintained.

The Myriad Designs of Water Wall Fountains

You can design a place to relax as well as add a touch of style to your porch or yard with a wall fountain since they are great adornments to fit into small space. Traditional, antique, modern, or Asian are just a few of the styles you can choose from when looking for an outdoor wall fountain to your liking. While there are innumerable prefabricated ones on the market, you may need a customized fountain if none of these are pleasing to you.

Mounted and stand-alone fountains are readily available on the market. Mounted wall fountains are small and self-contained versions which can be hung on a wall. One of the most important aspects of wall fountains is that they be lightweight, so they are typically made of fiberglass or resin to replicate the look of stone. In large free-standing fountains, otherwise referred to as wall fountains, the basin is located on the ground with the smooth side positioned against a wall. Generally made of cast stone, this kind of water feature is not restricted in weight.

It is a good idea to incorporate a customized fountain into a new or existing wall, something often suggested by landscape experts. Hiring an expert mason is your best option to build the basin and install the essential plumbing.

A fountain mask or a spout also needs to be incorporated into the wall. The unified look produced by custom-made wall fountains make them appear to be part of the landscape rather than an afterthought.

The Multiple Types of Wall Fountains

Putting a wall fountain in your backyard or patio is perfect when you want to unwind. You can have one made to suit your requirements even if you have a minimum amount of space. A spout, a water basin, internal piping, and a pump are vital for freestanding as well as mounted types. There are many different styles available on the market including traditional, fashionable, classical, or Asian.

With its basin placed on the ground, freestanding wall fountains, or floor fountains, are typically quite big in size.

A wall-mounted water feature can either be incorporated onto a wall already in existence or fitted into a wall under construction. The appearance of your landscape will seem more unified instead of disjointed when you install this kind of fountain.

Water Delivery Strategies in Historic Rome

Aqua Anio Vetus, the first raised aqueduct assembled in Rome, started out providing the many people living in the hills with water in 273 BC, although they had depended on natural springs up until then. When aqueducts or springs weren’t accessible, people dwelling at greater elevations turned to water pulled from underground or rainwater, which was made possible by wells and cisterns. Beginning in the sixteenth century, a unique method was introduced, using Acqua Vergine’s subterranean sections to generate water to Pincian Hill. Pozzi, or manholes, were made at standard stretches along the aqueduct’s channel. During the some nine years he possessed the property, from 1543 to 1552, Cardinal Marcello Crescenzi utilized these manholes to take water from the channel in buckets, though they were actually designed for the objective of cleaning and servicing the aqueduct. The cistern he had built to collect rainwater wasn’t adequate to meet his water demands. That is when he decided to create an access point to the aqueduct that ran under his residence.

The One Cleaning Solution to NEVER Use On Your Outdoor Water fountains

Water fountains will keep working a very long time with scheduled cleaning and maintenance. Leaves, twigs, and insects often find their way into fountains, so it is important to keep yours free from such things. On top of that, algae can be a challenge, because sun hitting the water enables it to form easily. Either sea salt, hydrogen peroxide, or vinegar can be mixed into the water to avoid this issue. Some people opt for adding bleach into the water, but the downside is that it harms wildlife - so it should be avoided.

A thorough cleaning every three-four months is ideal for garden fountains. The first task is to get rid of all the water. Then use a soft cloth and mild cleanser to scrub the inside. A useful tip is to use a toothbrush if there are tiny hard-to-reach spots. Make sure all the soap is totally rinsed off.

Calcium and fresh water organisms can get inside the pump, so you should really disassemble it to get it truly clean. You might want to let it soak in vinegar for a few hours to make it much less difficult to wash. Neither rain water nor mineral water contain ingredients that will accumulate inside the pump, so use either over tap water if possible.

Finally, be sure to have a quick look at your fountain every day and add water if you see that the level is too low. If the water level drops below the pump’s intake level, it can hurt the pump and cause it to burn out - something you do not want to happen!


The Revelation Garden Fountain at the Gardens of Chatsworth
Designed by popular British sculptor Angela Conner, "Revelation" is the latest addition to the Chatsworth ornamental outdoor water fountains. In commemoration of the Queen’s 80th birthday celebration, she was mandated by the... read more
The Latest Addition to the Gardens of Chatsworth: Revelation
“Revelation,” the most recent acquisition to the decorative garden fountains of Chatsworth, was developed by recognized British sculptor Angela Conner. She was delegated by the deceased... read more
The Dissemination of Outdoor Fountain Design Technology
Throughout Europe, the chief means of spreading useful hydraulic information and fountain design suggestions were the published pamphlets and illustrated books of the day,... read more
Builders of the First Water Fountains
Commonly working as architects, sculptors, artists, engineers and cultivated scholars, all in one, fountain designers were multi-talented individuals from the 16th to... read more
Gian Lorenzo Bernini's Garden Fountains
There are many celebrated Roman water fountains in its city center. One of the most distinguished sculptors and artists of the 17th century, virtually all of them were... read more
Rome’s Early Water Delivery Systems
Rome’s 1st elevated aqueduct, Aqua Anio Vetus, was built in 273 BC; prior to that, residents living at higher elevations had to depend on natural creeks for their water. When aqueducts or springs weren’t available, people living at higher elevations turned to water... read more